رد: موسوعة سوفتات +لودرات+قنوات+شروحات+صيانة كل ماتتمناه اختصر الطريق ومش حتلاقى حاجة لسة عاوزها +اطلب اى شىء
الاخطاء عند تحميل السوفت ومعانيها
Error Code Meaning Remedy
E-HC/bC Incorrect header block(CRC-16) The software seems damaged while you receive from *** site or e-mail.
Pls receive the software again and try to download
E-dC Incorrect data block(CRC-16) The software seems damaged while you receive from *** site or e-mail.
Pls receive the software again and try to download
E-Hn/bF Invalid HDF version This error can be occured when you attempt to download Non-Superset STB software to Superset or Vice-Versa.Pls check the STB model and the software
E-Id Invalid system ID This error can be occured when you attempt to download F1 software to F1-CI. Pls check the STB model and the software
E-AC Incorrect application CRC-32 Download latest version of application S/W
E-ut UART RX/TX time out There is communication problem between source and target
1) Check whether the S/W is compressed or not and Check whether you use the proper download tool for the software
2) Reduce the download speed and try to download again
3) STB main power Off/On and try to download again
4) Reset the PC and try to download again
E-Ad Invalid address Humax made the hdf file with wrong address.Pls notify this error to us and wait until we release the proper software.
E-Ao Invalid offset address for upload(Odd offset) There was a mistake when we made hdf file from ***ary file.Pls let us know immediately and wait new release version
E-Ft Flash program time out The flash memory in STB seems damaged. Pls try to download one more time. If you fail agian,send us back to replace the flash memory device
E-It/Et EEPROM program time out The EEPROM in STB seems damaged.Pls try to download one more time.
If you fail again,replace the EEPROM device
E-FE Fail compare after flash write Flash memory is damaged.Return the main board(CPU Board)
E-HF Invalid HDF Format Humax made the hdf file with wrong version. Pls notify this error to us and wait until we release proper software
E-Fn Invalid flash device Flash memory is defected Need to change the flash memory so Pls return the Main Board
E-AS Incorrect application size Check the software version and STB hardware specification
|