شكرا لك اخي العزيز ايمن لاداعي لديك تبين ان الجهاز خردة وبه مشكل من الشركة المصنعة
اصلا عند محاولة سحب الفلاش باللودر يكتب crc check error
ولا يحمل شيا بحتت كتيرا فوجدت به مشكل من التصنيع ياتي في التحديت لا يمكنك اان تسحب منه ولا ان تحمل له شيا + لا يوجد له تحديت ولادعم هو يشبه لحد ما openbox x5 HD لكن لا يمكن التحويل له لان openbox يكتب on عند التشغيل وهو يقلع بي 4 اشراط + فرق في chip id +الدي اكتشفته انه به عطل في البروس او rom والله اعلم لهدا لايقبل شيا لا تحديت ولا سحب التحديت
هدا مااستطعت ان استخرجه منه بعض المعلومات:
اقتباس:
ma = 0x82ae6800, vma_end = 0x82ae6c00, attr = 0x80000000, key = 0x00000000
---------- COPY DONE! ----------
[ DRAM PARAM DUMP ]
------------------------------------------
SYS GRP(0,6)=0x2ac
DRAM 540 MHz -- GRP(1,26)=0x40e81b87
------------------------------------------
PUB_INFO : ----- DUMP PUB-0 delay line status -----
ACBD_SETTING :0x0 AC_CK0BD_SETTING:0x0
STR_DQS_IN = 12 ; CL_CNT = 21 ; WL_CNT = 8 ...
AC_CK0BD=0x0
PUB_INFO : ********** DUMP Master Delay Line Register (Data-0 MDLR : DDR-clock-period ) **********
Data-0 Initial Period(IPRD) = 0x5d Target Period(TPRD) = 0x5c
PUB_INFO : ********** DUMP Master Delay Line Register (Data-1 MDLR : DDR-clock-period ) **********
Data-1 Initial Period(IPRD) = 0x5b Target Period(TPRD) = 0x5a
PUB_INFO : ********** DUMP LCDL status **********
[DATx8-0] [DATx8-1]
WL_LCDL = 0x29 WL_LCDL = 0x27
WDQ_LCDL = 0x28 WDQ_LCDL = 0x2b
RDQS_LCDL = 0x37 RDQS_LCDL = 0x2f
RDQSN_LCDL = 0x37 RDQSN_LCDL = 0x2f
RDQSG_LCDL = 0x23 RDQSG_LCDL = 0x17
PUB_INFO : ********** DUMP Data Training Eye status **********
WDQ_LCDL_MAX = 0x4c WDQ_LCDL_MIN = 0x5
RDQS_LCDL_MAX = 0x63 RDQS_LCDL_MIN = 0xc
PUB_INFO : ********** DUMP WBDL status **********
[DATx8-0] [DATx8-1]
DQ0_WBD = 0x4 DQ0_WBD = 0x0
DQ1_WBD = 0x3 DQ1_WBD = 0x0
DQ2_WBD = 0x0 DQ2_WBD = 0x0
DQ3_WBD = 0x0 DQ3_WBD = 0x0
DQ4_WBD = 0x1 DQ4_WBD = 0x0
DQ5_WBD = 0x0 DQ5_WBD = 0x0
DQ6_WBD = 0x0 DQ6_WBD = 0x0
DQ7_WBD = 0x0 DQ7_WBD = 0x1
DM_WBD = 0x10 DM_WBD = 0x6
PUB_INFO : ********** DUMP RBDL status **********
[DATx8-0] [DATx8-1]
DQ0_RBD = 0x3 DQ0_RBD = 0x4
DQ1_RBD = 0x9 DQ1_RBD = 0x0
DQ2_RBD = 0x1 DQ2_RBD = 0x0
DQ3_RBD = 0x1 DQ3_RBD = 0x2
DQ4_RBD = 0x3 DQ4_RBD = 0x4
DQ5_RBD = 0x4 DQ5_RBD = 0x2
DQ6_RBD = 0x0 DQ6_RBD = 0x6
DQ7_RBD = 0x3 DQ7_RBD = 0x4
-----------------------------------------------------
PUB_INFO : ----- PUB delay line register dump done -----
[ END DRAM PARAM DUMP ]
[PHOTO PLAY][IF][FUNCTION]NetPhotoMW_IF_PIC_MemInit:[LINE]64
[PHOTO][PLAY][FUNCTION]Photo_Play_MemInit_:[LINE]274
[PHOTO][PLAY][INFO][285]dSize=6461440
[PHOTO PLAY IF] NetPhotoMW_IF_PIC_MemInit: return [0]
PLF_GetNvmInfo, 659
[ModLoader] lma = 0x006f5000, lma size = 0x000fe000
[NVM] Boot from SPI
[SPI] init_spi_flash
[SPI] Ver 0101a916
[SPI] op code=9F, system_flash_id 0x001840ef
[SPI] op code=90, system_flash_id 0x000017ef
[SPI] flash_info 0x1840EF0510
[SPI] flash **** WB_Q128
[SPI] 1 bit mode
[IOP-RISC] IOP_RISC Data:
[49][4f][50][5f][44][41][54][41][ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0]
[ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0]
[ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0]
[ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0][ 0]
enter to card pin init
-------gsl kill thread start-----------
[HDMI] Using IC ver. 8600_E/1500_E!!!
[DAE][HDMI] hdmi_daemon_callback(1,0)
[DAE][HDMI] To eAppEvent( 101)
[MSG] warnning invalid handle.
[DAE][HDMI]Working!
[IOP] DRV_IOP_GetIopBufAddrValue(gIOPBufAddr = a2ae6c00)
[TASKPOOL] Cannot find handle for task **** 'CEC Thread'
[TASKPOOL] Caller addr = 0x81614f98
CEC Daemon fail!
[SPI] init_spi_flash
[SPI] Ver 0101a916
[SPI] op code=9F, system_flash_id 0x001840ef
[SPI] op code=90, system_flash_id 0x000017ef
[SPI] flash_info 0x1840EF0510
[SPI] flash **** WB_Q128
[SPI] 1 bit mode
<<plf flash layout>> i32LoaderHeaderOffset:=0x4bf48
<<plf flash layout>> ~~~~~~~~ SCS_AREA_SIZE:=0x10000
<<plf flash layout>> sizeof(module_header_t):=0x10,u32Len:=0x1000000
<<plf flash layout>> DVB1500_GetLastMainInfo11 pu8Data+u32Offset-sizeof(module_info_t):=0x5b160
<<plf flash layout>> i32RomCodeHeaderOffset:=0x6f5000
<<plf flash layout>> sizeof(MAIN_HEAD_t):=0x100,i32Offset:=0x6f5000
<<plf flash layout>> ~~~~~~~~ SCS_AREA_SIZE:=0x10000
<<plf flash layout>> sizeof(module_header_t):=0x10,u32Len:=0x1000000
<<plf flash layout>> DVB1500_GetLastMainInfo11 pu8Data+u32Offset-sizeof(module_info_t):=0x5b160
<<plf flash layout>> i32RomCodeHeaderOffset:=0x6f5000
<<plf flash layout>> ~~~~~~~~ SCS_AREA_SIZE:=0x10000
<<plf flash layout>> sizeof(module_header_t):=0x10,u32Len:=0x16bc3
<<plf flash layout>> mtab_header.next_table_offset:=0x2bf8dfe7,u32Len:= 0x16bc3
DVB_Check_UpgradeType: LOGO_0
PLF_GetNvmInfo, 659
[ModLoader] lma = 0x006f5000, lma size = 0x000fe000
u8FileType:=0xf
goio number 7 conflict
function: gpio for audio mute in use
-------------DSP Sign information: ---------------
version : 0x20111104
dwSvnRevision: 3090
gDspSignInfo : 0x20111104
dwSecureKey : 0x1840010
dwDolbyCfg : 0x0
dwChecksum : 0x8600abba
customer : 001
platform : 1502/1512
note : 005
uuid : b677a1b0-588e-11e2-8000-4b6000004b60
--------------------------------------------------
DSP::main:0:0x0000cdef
DRV_SMC_Init
[OVT] ir_program.
8600 Simple MON
date: May 7 2014 file:mon.c
Monitor Initialized!
enter BM_InitBufferManagement_func
[VPP1_err: E]
SPAL_IsSystemSetDamaged() current chksum=504800 , loaded chksum=504800
[VFONT MSG] Font Render Hardware Support
[VFONT MSG] Font Engine Version: 0x20101005
[VFONT MSG] Use DRAM A
[VFONT ERR]font_control: 0x2005
[VFONT ERR]font_status: 0x2
[VFONT MSG]Use freetype version 2.3.11
Notify Thread started!!!!
(!) DirectFB/Config: Unable to open config file `/usr/local/etc/directfbrc'!
=======================| DirectFB 1.1.0 |=======================
(c) 2001-2007 The DirectFB Organization (directfb.org)
(c) 2000-2004 Convergence (integrated media) GmbH
------------------------------------------------------------
(*) DirectFB/Core: Single Application Core. (2011-12-19 02:55)
(*) System/DevMem: Memory Preallocated at 0x88481e90 1024 bytes
[GPU DRV] Cmd mode 2 started, size = 0x8000!!
[GPU DRV]GPU is on DRAM A!!
(*) DirectFB/Graphics: SUNPLUS GPU 1.0 (SUNPLUS)
(*) DirectFB/Core/WM: Default 0.3 (directfb.org)
DCache line size: 32 bytes
===========================
config_memory_size 22
===========================
MID_DISP_SetSrcMemMode TryLockFreeBuf fail
=== BM_Init ===
@PIC_Decode_VPP: w= 1280, h= 720
Chip ID = [DS3103]
COM1:Close success!
|